STUDY 300-620 GROUP, LATEST BRAINDUMPS 300-620 BOOK

Study 300-620 Group, Latest Braindumps 300-620 Book

Study 300-620 Group, Latest Braindumps 300-620 Book

Blog Article

Tags: Study 300-620 Group, Latest Braindumps 300-620 Book, 300-620 Guide, Exam 300-620 Questions Fee, 300-620 Latest Dumps Files

2025 Latest Actual4Labs 300-620 PDF Dumps and 300-620 Exam Engine Free Share: https://drive.google.com/open?id=1DcSSgjyYlYaddtUCJBN7yrNbNw1z5dly

We can promise that we are going to provide you with 24-hours online efficient service after you buy our Implementing Cisco Application Centric Infrastructure guide torrent. If you purchase our 300-620 test guide, we are going to answer your question immediately, because we hope that we can help you solve your problem about our 300-620 exam questions in the shortest time. We can promise that our online workers will be online every day. If you buy our 300-620 Test Guide, we can make sure that we will offer you help in the process of using our 300-620 exam questions. You will have the opportunity to enjoy the best service from our company.

Cisco 300-620 exam covers a range of topics, including ACI fabric infrastructure, ACI external connectivity, ACI policy-based configuration, ACI management, and ACI troubleshooting. It is important to note that the exam is designed to test your knowledge and skills in these areas, so it is essential to have hands-on experience with ACI before attempting the exam.

To prepare for the Cisco 300-620 Exam, candidates can take training courses offered by Cisco or other authorized training providers. These courses cover all the topics that are included in the exam and provide hands-on experience with Cisco ACI solutions. Additionally, candidates can use study resources such as books, practice exams, and online forums to reinforce their knowledge and skills.

>> Study 300-620 Group <<

Latest Braindumps 300-620 Book | 300-620 Guide

The 300-620 exam bootcamp is quite necessary for the passing of the exam. Our 300-620 exam bootcamp have the knowledge point as well as the answers. It will improve your sufficiency, and save your time. Besides, we have the top-ranking information safety protection system, and your information, such as name, email address will be very safe if you buy the 300-620 bootcamp from us. Once you finished the trade our system will conceal your information, and if order is completely finished, we will clean away your information, so you can buy our 300-620 with ease.

Cisco 300-620 Exam is an advanced-level certification test that focuses on the implementation of Cisco Application Centric Infrastructure (ACI). 300-620 exam is designed for IT network professionals who want to demonstrate their expertise in deploying, configuring, and managing Cisco ACI solutions. Implementing Cisco Application Centric Infrastructure certification is a valuable asset for IT professionals who want to advance their careers and improve their job prospects in the IT industry.

Cisco Implementing Cisco Application Centric Infrastructure Sample Questions (Q14-Q19):

NEW QUESTION # 14
In a Cisco ACI Multi-Site fabric, the Inter-Site BUM Traffic Allow option is enabled in a specific stretched bridge domain. What is used to forward BUM traffic to all endpoints in the same broadcast domain?

  • A. ingress replication on the spines in the source site
  • B. egress replication on the source leaf switches
  • C. egress replication on the destination leaf switches
  • D. ingress replication on the spines in the destination site

Answer: A

Explanation:
In a Cisco ACI Multi-Site fabric, when the Inter-Site BUM Traffic Allow option is enabled for a stretched bridge domain, ingress replication on the spines in the source site is used to forward Broadcast, Unknown unicast, and Multicast (BUM) traffic to all endpoints in the same broadcast domain. This method ensures that BUM traffic is replicated and sent out through the spines to the destination sites.


NEW QUESTION # 15
Which tenant is used when configuring in-band management IP addresses for Cisco APICs, leaf nodes, and spine nodes?

  • A. common
  • B. mgmt
  • C. infra
  • D. default

Answer: B

Explanation:
Reference:
https://www.cisco.com/c/en/us/td/docs/switches/datacenter/aci/apic/sw/kb/ b_KB_Configuring_Static_Management_Access.html#concept_CFF63FEBE947424291B0F10E6F23DA7D


NEW QUESTION # 16
A Solutions Architect is asked to design two data centers based on Cisco ACI technology that can extend L2/ L3, VXLAN, and network policy across locations. ACI Multi-Pod has been selected. Which two requirements must be considered in this design? (Choose two.)

  • A. ACI Multi-Pod does not support Firewall Clusters across Pods. Firewall Clusters should always be local.
  • B. A single APIC Cluster is required in a Multi-Pod design. It is important to place the APIC Controllers in different locations in order to maximize redundancy and reliability.
  • C. Multi-Pod requires multiple APIC Controller Clusters, one per pod. Make sure those clusters can communicate to each other through a highly available connection.
  • D. ACI Multi-Pod requires an IP Network supporting PIM-Bidir.
  • E. ACI underlay protocols, i.e. COOP, IS-IS and MP-BGP, spans across pods. Create QoS policies to make sure those protocols have higher priority.

Answer: C,E

Explanation:
Section: ACI Anywhere
Explanation/Reference:


NEW QUESTION # 17
A data center administrator is upgrading an ACI fabric. There are 3 APIC controllers in the fabric and all the servers are dual-homed to pairs of leaf switches configured in VPC mode. How should the fabric be upgraded to minimize possible traffic impact during the upgrade?

  • A. 1. Create two maintenance groups for the leaf switches: VPC left and VPC right.
    2. Upgrade the first group of switches.
    3. Upgrade the second group of switches.
    4. Upgrade the APIC controllers.
  • B. 1. Create two maintenance groups for APIC controllers: VPC left and VPC right.
    2. Upgrade the leaf switches.
    3. Upgrade the first group of controllers.
    4. Upgrade the second group of controllers.
  • C. 1. Create two maintenance groups for the APIC controllers: VPC left and VPC right.
    2. Upgrade the first group of controllers.
    3. Upgrade the second group of controllers.
    4. Upgrade the leaf switches.
  • D. 1. Create two maintenance groups for the leaf switches: VPC left and VPC right.
    2. Upgrade the APIC controllers.
    3. Upgrade the first group of leaf switches.
    4. Upgrade the second group of leaf switches.

Answer: D

Explanation:
You need to upgrade the APIC first and group of switches.
At a high level, steps to upgrade or downgrade the Cisco ACI fabric are as follows:
The procedure or steps for upgrade and downgrade are the same unless stated otherwise in the release notes of a specific release.
Ensure that you have the required CIMC version required for Cisco APIC upgrade. See the Cisco APIC Release Notes for the supported CIMC versions and Upgrading the CIMC Software for the procedures for upgrading the CIMC software, if necessary.
Download the Cisco ACI Controller image (Cisco APIC image) into the repository.
Download the Cisco ACI switch image into the repository.
Upgrade the cluster of Application Policy Infrastructure Controllers (Cisco APICs).
Verify that the fabric is operational and the APIC cluster is "Fully Fit" before proceeding.
Divide the switches into multiple groups, and upgrade the switches by group, verifying that the fabric is operational between switch group upgrades. For example, assume that you divided the switches into two groups - red and blue. You could then go through the following upgrade process:
1. Upgrade the red group of switches.
2. Verify that the fabric is operational.
3. Upgrade the blue group of switches.
4. Verify that the fabric is operational.
https://www.cisco.com/c/en/us/td/docs/switches/datacenter/aci/apic/sw/all/apic-installation- upgrade-downgrade/Cisco-APIC-Installation-Upgrade-Downgrade-Guide/Cisco-APIC-Installation- Upgrade-Downgrade-Guide_chapter_011.html#id_48185


NEW QUESTION # 18
Refer to the exhibit. Which Adjacency Type value should be set when the client endpoint and the service node interface are in a different subnet?

  • A. Unicast
  • B. L3Out
  • C. L3
  • D. Routed

Answer: C

Explanation:
When enabling routing, keep in mind that you must enable it in two places in the service graph:
* The bridge domain
* The graph connector
Figure 20 illustrates this point.
Figure 20. When Enabling Routing on a Bridge Domain, Make Sure That the Graph Template Connectors Are Set for Routing

In general, these connectors are set to unicast routing by default. This setting makes the final state of the bridge domain dependent only on the routing configuration on the bridge domain.
If the connector is associated with a bridge domain that provides the Layer 3 outside (L3Out) interface function, in addition to verifying that the unicast routing option is set to true, you need to make sure that the adjacency is set to Layer 3, not Layer 2, as in Figure 21.
Figure 21. To Help Ensure That the Switch Virtual Interface Is Enabled on the Bridge Domain with L3Out, Set Adjacency to Layer 3

In summary, IP routing may be necessary in bridge domains that meet the following criteria:
* Bridge domains that provide routing to bridge domains that provide routing to another bridge domain or to the outside
* Bridge domains to which servers are connected, if you plan to use endpoint attachment
https://www.cisco.com/c/en/us/solutions/collateral/data-center-virtualization/application-centric- infrastructure/white-paper-c11-734298.html


NEW QUESTION # 19
......

Latest Braindumps 300-620 Book: https://www.actual4labs.com/Cisco/300-620-actual-exam-dumps.html

What's more, part of that Actual4Labs 300-620 dumps now are free: https://drive.google.com/open?id=1DcSSgjyYlYaddtUCJBN7yrNbNw1z5dly

Report this page